The devices and manufacturers Track-TP keeps under control.
Track-TP ships with preconfigured monitoring profiles for a broad and constantly growing catalogue: radios, power systems, radio links, network devices, radiation detectors, and IoT sensors. The catalogue covers over 50 device models from more than thirty-five manufacturers, plus a generic profile for any device that uses SNMP (Simple Network Management Protocol), MQTT, or ping. New device types and new manufacturers are added on request.
More than thirty-five manufacturers, a single platform.
Track-TP brings together, in a single platform, the devices from the manufacturers you already find across your networks, from radio systems to UPS units to microwave links.
Don’t see your manufacturer? On request we integrate any device that uses SNMP, syslog, or HTTP. Request an integration
A preconfigured profile for every family of devices.
For each model the profile defines the metrics to read and the manufacturer’s alarm tables, so the device enters monitoring with no manual configuration. The generic profile then covers any device compliant with the SNMP, MQTT, syslog, or ping standards.
Teleproject
- RFX
- CellX
- CVVX
- VoIP Server
- VoIP Console
Motorola Solutions
- SLR 5500
- SLR 8000
- MTR3000
Hytera
- RD985S
- RD625
Kenwood
- NXR-1800E2
- NXR-1700E
Tait Communications
- TB9300
- TB7300
Icom
- IC-FR5300
- IC-FR6300
Funktronic
- FT-636
- BFD221
- Major 1V
- Major 4V/4VD
- Major 8V/8VD
RadioActivity / Kairos
- TP080
- TP080N
- TP160
- TP160N
- TP450
- TP450N
Benning
- SLIMLINE
- ADC III
Microset
- HP-SNMP
- TOP-R SNMP
- HS SNMP
- COMBY CAB SNMP
APC
- Smart-UPS
- Symmetra
Eaton
- 9PX
- 5P
Vertiv
- Liebert GXT5
- Liebert ITA2
Riello UPS
- Sentinel
- Multi Sentry
- NetMan 204
Socomec
- NET VISION
UPS standard RFC 1628
- Profilo universale: batteria, uscita e 24 allarmi standard
Cisco
- Catalyst 9200
- Catalyst 9300
- ISR 4000
Cisco Meraki
- Serie MS
- Serie MR
- Serie MX
Juniper Networks
- Serie EX
- Serie SRX
Extreme Networks
- X440-G2
- X460-G2
HPE Aruba Networking
- CX 6100
- CX 6300
- AP-515
MikroTik
- Serie CCR
- Serie CRS
- Serie RB
Teltonika Networks
- RUT955
- RUTX11
Ubiquiti
- UniFi
- airMAX
- EdgeMAX
Moxa
- E1212
SIAE
- ALCplus2
Ceragon
- FibeAir IP-20
Cambium Networks
- PTP 820
Aviat Networks
- WTM 4000
Nokia
- Wavence
Ericsson
- MINI-LINK
Meinberg
- LANTIME serie M
- LANTIME IMS
Elenos
- Indium
- ETG
- Combo
Milesight
- Serie EM300
- Serie WS
- UG65
Dragino
- LHT65N
- LSN50v2
- LPS8N
RAKwireless
- WisGate Edge
Kerlink
- Wirnet iStation
- Wirnet iFemtoCell
MultiTech
- Conduit
Generico
- Profilo “Other”
Over 50 device models from more than thirty-five manufacturers, spanning radios, power systems and UPS units, network devices, radiation detectors, microwave links, VoIP, and LoRaWAN sensors and gateways. The list grows with every new integration.
LoRaWAN sensors, alongside the rest of the network.
LoRaWAN sensors connect through ChirpStack and appear on the same map and the same dashboards as the network devices. The Teleproject range includes six sensors for environment and infrastructure; the platform also integrates LoRaWAN sensors from other manufacturers, such as Milesight, Dragino, and RAKwireless.
The Teleproject range:
- TP-810Light intensity
- TP-811CO₂, pressure, humidity, and temperature
- TP-812Temperature
- TP-813Light intensity
- TP-814Controller
- TP-815Ultrasonic distance and level
For every sensor, Track-TP tracks:
- Battery
- charge level to plan replacement
- Last reception
- timestamp of the last packet received
- Geolocation
- the sensor’s position on the map
- Signal quality
- RSSI, SNR, and radio link margin
Functions built for specific equipment.
Beyond basic monitoring, some devices have dedicated functions: the CellX’s cellular network scan, per-channel control of Funktronic consoles, and the generic profile for everything else.
Cellular network scan
The CellX discovers and characterizes the cellular networks nearby, with configurable scan modes. Useful in tunnels to check mobile coverage tunnel bore by tunnel bore.
- 2G
- 3G
- 4G
- 5G
- power
- quality
- band
- channel
- cell ID
Funktronic multi-channel consoles
Per-channel monitoring on 1-, 4-, 8-, or 16-channel consoles, with an alarm on link loss and an automatic clear on recovery, plus real-time configuration export.
Generic SNMP and ping devices
Any standard-compliant device can be monitored for network presence and basic SNMP data through the generic profile, even without a dedicated profile.
Don’t see your equipment?
The catalogue grows continuously with new manufacturers and new models. If your device uses SNMP, MQTT, Modbus TCP, OPC UA, BACnet/IP, IEC 60870-5-104, DNP3, syslog, or HTTP, it can be integrated: tell us the device and we prepare its monitoring profile, with its metrics and its alarm tables.
Go deeper, page by page.
How devices connect, how they become alarms, and how you view them every day.
- 01
Track-TP overview
The platform in brief: architecture, protocols, and interface.
- 02
Integrations
How these devices connect: SNMP, syslog, REST API, and ChirpStack webhooks.
- 03
Alarms and notifications
Thresholds, priorities, and notifications via Email, Telegram, WhatsApp, SNMP trap, and app.
- 04
Features
Monitoring, dashboards, maps, and reporting in a single view.
All your equipment under control.
In a single platform.
Together we map the devices and sensors to supervise, prepare the monitoring profiles you need, and choose between cloud and on-premises. Design, installation, and technical support handled directly by Teleproject.